How to Apply Glossy Stickers on a Laptop Case

Quick answer

Clean your laptop case, position the sticker dry first, then apply it slowly from the center outward. Use a squeegee or credit card to remove bubbles and let it cure for 24 hours before heavy use.

Step-by-step guide to apply glossy stickers on a laptop case

1. Clean the surface: Wipe your laptop case with a lint-free cloth and rubbing alcohol to remove oil and dust. Let it dry completely. Skipping this step can cause bubbles or poor adhesion.
2. Position the sticker dry: Place the glossy sticker on the case without removing the backing. Adjust until it's exactly where you want it. Mark the spot with a light pencil dot if needed. Once the sticker touches the surface, repositioning is hard.
3. Apply from the center outward: Peel off the backing and press the center of the sticker down. Use a credit card or squeegee to push air bubbles toward the edges. Work slowly. Working from the center prevents trapped bubbles.
4. Smooth edges and corners: Run your fingernail or a soft cloth along the edges to ensure full contact. For curved laptop corners, warm the sticker with a hairdryer on low to make it more flexible. Edges that lift now will peel later.
5. Let it cure: Leave the laptop case flat for 24 hours before using it. Avoid closing the lid tightly or placing it in a bag during this time. The adhesive needs time to bond fully.

Sticker we recommend

• Snappy Lobster Glossy Sticker: This glossy die-cut sticker features original Monday Anyway artwork of a bright red lobster with a cute, playful personality. Its glossy finish and cheerful design make it a standout decoration for a laptop case, and the die-cut shape follows the lobster outline for a clean look.